Agilent Technologies 8935 Series Manual do Utilizador Página 192

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 329
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 191
192 Chapter 6
O:\Manuals\E6380A_Progguid\Book\Advoper.fm
Advanced Operations
Passing Control
Example 6-110 Example
PASS CONTROL 714
This command passes control to the Test Set.
7. Put the Test Set in local mode (press the LOCAL key on the front
panel).
8. Press SHIFT, then TESTS on the front panel of the Test Set to print
the screen.
9. After the Test Set finishes printing the screen it will automatically
pass control back to the HP 9000 Workstation.
Passing Control Between an External Controller and the Test
Set with an IBASIC Program Running
The following example program illustrates the passing of control
between an external Controller and the Test Set while an IBASIC
program is running in the Test Set. The example is based upon having
an HP 9000 Series 300 Workstation as the external controller connected
to the Test Set through the HP-IB bus. Further, it is based on the
assumption that the HP-IB interface in the HP 9000 Controller is set to
the default select code of 7 and address of 21. In this example, the Test
Set is NOT configured as the System Controller. This example
illustrates the situation where the External Controller would perform
the functions listed below.
1. Sends commands to the Test Set to cause a program to be loaded off
of a Memory Card which is in the Test Set’s front panel Memory
Card slot.
2. Sends commands to the Test Set to run the program just loaded.
3. Passes control to the Test Set and then does other work while the
Test Set is making measurements.
When the Test Set is finished making measurements and has data
available for the External Controller, it passes control back to the
External Controller.
4. The External Controller then requests the data from the Test Set.
The following program would run in the External Controller:
Vista de página 191
1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 328 329

Comentários a estes Manuais

Sem comentários