Agilent Technologies 8935 Series Especificações descarregar pdf (Página 89)

100

101

88 Chapter 3

Troubleshooting

Service Screen

Latch

This field is used to manually select the circuit latches that control

switch, DAC, and gain settings within the Test Set. The value of the

selected latch is displayed and changed in the Value field. Some

settings are read-only.

To set a switch, DAC, or gain setting:

1. Use the knob to select the Latch field. A Choices menu will appear.

2. Move the cursor to the desired latch name and press the knob to

select it.

3. Use the knob to select the Value field. A flashing >> cursor is

displayed.

4. Rotate the cursor control knob to modify the value (hexadecimal).

NOTE

If any of the switches, DACs, or gain settings are changed with the

Latch field, the Test Set will generate the message: Direct latch

write occurred. Cycle power when done servicing.” To clear this

message, cycle the Test Set’s power. Upon power-up, the internal

controller will return the Test Set to its default settings and values.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 342 343

Comentários a estes Manuais

Sem comentários

Agilent Technologies 8935 Series Especificações Página 89

Comentários a estes Manuais

Manuais e produtos relacionados com Multímetros Agilent Technologies 8935 Series