Agilent Technologies 8935 Series Manual do Utilizador Página 217

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 352
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 216
Chapter 1 217
GPIB Command Dictionary
MEASure subsystem
:AFRequency:SNR <meas cmnd>
:AFRequency:SNR?
These commands set/query the SNR measurement. SNR must first be
selected using the MEAS:AFR:SEL ‘SNR’ command (see page 216).
Syntax
MEAS:AFR:SNR <meas cmd> !controls the SNR command
MEAS:AFR:SNR? !returns the measurement’s value
Example
MEAS:AFR:SNR !displays the measurement
Screen/field equivalent
MEAS:AFR:SNR? reads to the SNR measurement field on the AF
ANALYZER screen. This measurement is also displayed on the RF
GENERATOR and RF ANALYZER screens.
:CANalyzer:ADC:APOWeradc:LEVel <meas cmnd>
:CANalyzer:ADC:APOWeradc:LEVel?
These commands set/query the ADC for the average power
measurement. The ADC is a measure of how close the actual input
signal is to the maximum input level.
This measurement utilizes the Number Measurement Syntax, but does
not use the :METer command.
Syntax
MEAS:CAN:ADC:APOW:LEV <meas cmd>
!See “Number Measurement Syntax” on page 283.
MEAS:CAN:ADC:APOW:LEV?
Example
MEAS:CAN:ADC:APOW:LEV? !displays the measured value
Screen/field equivalent
MEAS:CAN:ADC:APOW:LEV? reads the ADC FS measurement field on
the CDMA ANALYZER screen when an average power measurement is
selected. This measurement is also displayed on the CDMA
GENERATOR screen.
Vista de página 216
1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 351 352

Comentários a estes Manuais

Sem comentários