Agilent Technologies 1100 Series Manual do Utilizador descarregar pdf (Página 58)

Troubleshooting your System

Using Module Tests

Select Show Module Tests. Figure 33 shows the VW detector module test

screen. From the procedure list select a test (e.g. Intensity Test) and press

Start. The tests runs and outputs an intensity spectrum and the test results. If

a test fails (or part of it) you can select on the troubleshooting guide a

symptom and you will get a possible cause. Use the module’s Reference

Manual to correct the problem.

Figure 33 Module Tests

If test failed

Troubleshooting Guide, select

a symptom and then

a defect cause

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 75 76

Sem comentários

Agilent Technologies 1100 Series Manual do Utilizador Página 58