Agilent Technologies 1100 Series Manual do Utilizador descarregar pdf (Página 19)

Installing your System

Installing the JetDirect card into the VW detector

Installing the JetDirect card into the VW

detector

The 1100 series VW detector should be the module that is connected via LAN

to the Value Solution ChemStation PC. Therefore a JetDirect card must be

installed into this module.

CAUTION Electronic boards and components are sensitive to electronic discharge

(ESD). In order to prevent damage always use an ESD protection (for

example, the ESD wrist strap from the module’s accessory kit) when handling

electronic boards and components, see “Using the ESD Strap” in the module’s

Reference Manual.

1 Loosen the two screws that fix the metal cover at the rear of the module and

remove it.

2 Slide the JetDirect card into the slot and fix the two screws.

Figure 1 Location of the JetDirect card

JetDirect card (LAN)

Thumb screws

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 75 76

Sem comentários

Agilent Technologies 1100 Series Manual do Utilizador Página 19