Agilent Technologies 53230A Especificações descarregar pdf (Página 197)

Chapter 4 Retrofitting Options

To Retrofit the Internal Battery DC Power (Option 300)

Assembly-Level Service Guide 197

4 Slide the outside cover of the counter to the rear and remove the

cover.

Battery Assembly Installation Procedure

1 Using a medium slot-head screwdriver, gently push back the 4-pin

connector lock tab on the motherboard end of the jumper cable

that connects between the Motherboard (J1000) and the

PowerSupply board (J2). Refer to Figures 4-1 and 4-2.

Figure 4-1. Connector Locking Tab

2 Gently move the cable 4-pin connector side-to-side while pulling

upward on the cable connector until the jumper cable is free from

the motherboard.

3 Repeat steps 1 and 2 for the other end of the jumper cable where

it connects to the AC power supply assembly (6-pin connector) on

the side wall of the instrument. See Figure 4-2. Set the jumper

cable aside in a safe location in case it is needed in the future.

Tab

J1000

1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 259 260

Sem comentários

Agilent Technologies 53230A Especificações Página 197