Agilent Technologies 6634A Manual do Utilizador descarregar pdf (Página 77)

Connecting the DUT Power Supply Cables

Connecting Output, Overvoltage, Power and

GPIB Cables in the 79000

The DUT power supply cables in the 79000 are factory

installed in the cradle. The E2190-61607 cable connects

to the 6624A power supply, as show in

Figure 37 on

page 75. The E2190-61606 connects to the 6634A/Bs as

shown. Unused cables should be tied out of the way.

The power cables are plugged into the outlet in the back

of the pod.

The GPIB cables must be connected as

shown both in

Figure 36 on page 70, and Figure 37

with the DUT supplies on the end of the GPIB cable

string.

1 The DUT power supply line voltages are set according to the instructions in Setting the DUT Power Supply Line Voltage on page 8.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82

Sem comentários

Agilent Technologies 6634A Manual do Utilizador Página 77