Agilent Technologies 6634A Manual do Utilizador descarregar pdf (Página 45)

Connecting the DUT Power Supply Cables

The cables used to connect the DUT power supplies

were included with the module(s). You should find the

cables coiled in the testhead of 317X or 327X systems

or in the support bay of the 307X system. The cable

numbers are listed in

Table 1 on page 6. The cable

connector ends are illustrated in

Figure 1 on page 7; the

ASRU Card end of the cable can be either a 34-pin

connector or a 20-pin connector. The 34-pin connector

is for ASRU channels 1-4, and the 20-pin connector is

for channels 5-6, found only on ASRU-C Cards.

The ASRU Card is illustrated in

Figure 19 on page 43.

The DUT power supply connections are J4 and J9. J9 is

present only on ASRU-C Cards.

E3784A 6642A 1 output:0-20 V, 0-10 A

1. The 44940A is a standard 6624A supply; the E3785A is a faceless 6624A supply.

2. This supply requires the 03066-66532 ASRU-C Card.

Table 8 DUT power supplies

Product No. Model No. Description

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 81 82

Sem comentários

Agilent Technologies 6634A Manual do Utilizador Página 45