Agilent Technologies 8000 Series Manual do Operador Página 76
- Página / 126
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
76 8000 Operator’s Manual
4 Operating the 8000
4 Manual Prime Vol.
(syringe pump)
If your system configuration includes the syringe pump, use this option to set the
amount of drawn medium necessary to fill the sampling lines of the entire system.
Select option 4, Manual Prime Vol. Enter a value for the priming volume and press
ENTER. The Main Menu displays.
Note: At a minimum, the manual prime volume should be large enough for medium
to be seen dripping from the return cannulas. In general, the longer the tubing
lengths, the larger the priming volume required. This value is not used by sampling
programs which have their own individual priming volume values. It is used only
with the MANUAL SAMPLE and CLEAN SYSTEM keys on the 8000.
5 Manual Purge Time
(peristaltic pump)
If your system configuration includes the peristaltic pump, use this option to set the
interval the peristaltic pump runs in reverse to return the uncollected medium in each
line back into the vessel from which it was drawn.
Select option 5, Manual Purge Time. Enter a value for the manual purge time from 1
to 99 seconds and press ENTER. The Main Menu displays.
Note: Purging also clears the sampling filters of particulate matter that may restrict
successive samples. As with priming, the longer the tubing lengths, the longer the
purge time required. This value is not used by sampling programs, which have their
own individual purging time values. It is used only with the MANUAL SAMPLE,
CAL, and CLEAN SYSTEM keys on the 8000.
5 Manual Purge Vol.
(syringe pump)
If your system configuration includes the syringe pump, use this option to set the a
purge volume that ensures all stranded medium is properly expelled.
Select option 5, Manual Purge Vol. Enter a value for the purge volume that ensures at
least two strokes of the plunger and press ENTER. The Main Menu displays.
Note: The first stroke moves all medium from the sampling lines to the return lines.
The second stroke draws air into the sampling lines and purges the remaining
medium from the return lines. As with priming, the longer the tubing lengths, the
larger the purge volume required. This value is not used by sampling programs
which have their own individual purge volume values. It is used only with the
MANUAL SAMPLE and CLEAN SYSTEM keys on the 8000.
6 Control APP 3/7 Use this option to remotely control the Apparatus 3 / 7 from the 8000. See “Main
Menu Option 6 - Control APP 3/7” on page 82.
7 Manual Operation Use this option to manually control the 8000. See “Main Menu Option 7 - Manual
Operation” on page 83.
Table 1 5 Main Menu Options (Apparatus 3 / 7)
Option Function
- Agilent 8000 1
- Dissolution Sampling 1
- Contents 3
- 4 8000 Operator’s Manual 4
- 8000 Operator’s Manual 5 5
- 6 8000 Operator’s Manual 6
- 8000 Operator’s Manual 7 7
- 8 8000 Operator’s Manual 8
- 8000 Operator’s Manual 9 9
- 10 8000 Operator’s Manual 10
- Electrical Hazards 12
- Information Symbols 14
- Introduction 15
- 8000 with Peristaltic Pump 17
- CC1234xxxx 18
- Setting Up the 8000 19
- Unpacking Your 8000 21
- Installation 22
- Setup of 8000 and Components 34
- Installing the Sample Tray 36
- (Peristaltic Pump only) 37
- Installing the RM Module 38
- External Unit 39
- Hidden Key Functions 41
- 42 8000 Operator’s Manual 42
- 3 Setting Up the 8000 42
- Table 1 Hidden Key Functions 42
- Setting Up the 8000 3 43
- 8000 Operator’s Manual 43 43
- 44 8000 Operator’s Manual 44
- Operating the 8000 45
- 8000 Keypad Options 46
- Operating the 8000 4 47
- 8000 Operator’s Manual 47 47
- Main Menu 48
- 8000 Operator’s Manual 49 49
- 50 8000 Operator’s Manual 50
- 52 8000 Operator’s Manual 52
- 54 8000 Operator’s Manual 54
- 56 8000 Operator’s Manual 56
- 60 8000 Operator’s Manual 60
- Creating a Sample Program 61
- 8000 Operator’s Manual 63 63
- 64 8000 Operator’s Manual 64
- SAMPLE TIME POINT: 000:02 65
- Starting a 8000 Program 66
- 68 8000 Operator’s Manual 68
- DISSO Options Screen 69
- 70 8000 Operator’s Manual 70
- 8000 Operator’s Manual 71 71
- 8000 Operator’s Manual 73 73
- 8000 Operator’s Manual 75 75
- 76 8000 Operator’s Manual 76
- 78 8000 Operator’s Manual 78
- 82 8000 Operator’s Manual 82
- ON R-M PUMP displays 84
- 8000 Operator’s Manual 85 85
- 88 8000 Operator’s Manual 88
- 8000 Operator’s Manual 89 89
- Starting a Program 91
- APP 3/7 Options Screen 93
- 94 8000 Operator’s Manual 94
- Table 2 4 App 3/7 Options 94
- Manual Sample 95
- 96 8000 Operator’s Manual 96
- Automatic Calibration 97
- 1 MANUAL 2 AUTOMATIC 98
- Manual Calibration 99
- Daisy Chaining 102
- 104 8000 Operator’s Manual 104
- 4 Operating the 8000 104
- Agilent Technologies 105
- Preventive Maintenance 106
- Apparatus 3 / 7 107
- Start Immediately 108
- Programmed Clean 108
- Apparatus 1 / 2 111
- Syringe and Seal Replacement 112
- Cleaning the Syringes 113
- Filter Changer (optional) 115
- Report Center Impact Printer 119
- Replacing a Paper Roll 120
- Toggling Your Printer Online 121
- Printer Self Test 121
- Printer Configuration 122
- 124 8000 Operator’s Manual 124
- 8000 Operator’s Manual 125 125
- 126 8000 Operator’s Manual 126
Manuais e produtos relacionados com Digitalizar e Imprimir Agilent Technologies 8000 Series
(82 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.048 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais