Agilent Technologies B1500A Guia do Utilizador Página 493

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 628
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 492
Agilent B1500 Users Guide, Edition 7 9-19
If You Have a Problem
B1500A System Recovery
B1500A System Recovery
If you find problems in the B1500A system, perform the system recovery.
“To Perform System Recovery”
“To Initialize Database”
“To Restore Database”
NOTE Before system recovery
After performing B1500A system recovery, the C drive will be returned to the
condition when you received the B1500A or when it left the factory. To avoid
deleting valuable data, Agilent Technologies strongly recommends to make backup
of data in the C drive before starting the system recovery. See “Data Backup and
Recovery” on page 9-14 for making the backup.
To Perform System Recovery
B1500A system recovery can be performed by the following procedure.
1. Set the B1500A Standby switch to the OFF position.
2. Disconnect all USB devices from the B1500A.
3. Connect the USB keyboard to a USB port of the B1500A.
4. Set the B1500A Standby switch to the ON position.
5. On the boot system selection menu, select Agilent Recovery System, and press
En
ter key. To se
lect the system, use arrow keys.
The Command Prompt window is opened. See Figure 9-1.
Where, 2 is not valid now. 3 should be entered for rebooting the B1500A
without perf
orming system recovery.
6. For the message “Enter a Choice:”, enter 1 and press the Enter key. Message will
be display
ed for asking if you allow to overwrite the C drive.
7. For the message, enter 1 and press the Enter key. System recovery
starts. After
the recovery completes successfully, system boot starts automatically.
8. Perform “To Initialize Database” on page 9-20.
9. Perform “To Restore Database” on page 9-21.
Vista de página 492
1 2 ... 488 489 490 491 492 493 494 495 496 497 498 ... 627 628

Comentários a estes Manuais

Sem comentários