Agilent Technologies E6640A EXM Manual de Serviço descarregar pdf (Página 232)

232 Chapter 15

cdma2000 Programming Commands

Occupied Bandwidth (OBW)

cdma2000 Programming Commands

Occupied Bandwidth (OBW)

This section provides the remote control SCPI commands for the cdma2000 Occupied Bandwidth

(OBW) measurement from within the List Sequencer. This measurement is available only if you have the

cdma2000 measurement application licensed on the test set.

For more detailed information about the cdma2000 OBW measurement, refer to the online help

associated with the cdma2000 measurement application, which is also available in PDF format (“User’s

and Programmer’s Reference”) on the Agilent website, www.agilent.com/find/e6640a.

You can also refer to the measurement guide for the X-series cdma2000 measurement application, which

is available on the Agilent website, www.agilent.com/find/mxa.

OBW measurement SCPI commands

There is a set of SCPI commands available to program the cdma2000 OBW measurement when it is used

in the cdma2000 mode. To set up the cdma2000 measurements from within the Sequence Analyzer mode

you need to prefix the SCPI commands with LSEQuencer:C2K. For example, the [:SENSe]:OBWidth

part of the OBW SCPI commands are replaced with: [:SENSe]:LSEQuencer:C2K:OBWidth

The following commands are used to set up the OBW measurement.

[:SENSe]:LSEQuencer:LTETdd:OBWidth:BANDwidth[:RESolution]

[:SENSe]:LSEQuencer:LTETdd:OBWidth:BANDwidth:SHAPe

[:SENSe]:LSEQuencer:LTETdd:OBWidth:PERCent

[:SENSe]:LSEQuencer:LTETdd:OBWidth:XDB

CALCulate:[SENSe]:LSEQuencer:LTETdd:OBWidth:LIMit:FBLimit

CALCulate:[SENSe]:LSEQuencer:LTETdd:OBWidth:LIMit[:TEST]

[:SENSe]:LSEQuencer:LTETdd:OBWidth:FREQuency:SPAN

[:SENSe]:LSEQuencer:LTETdd:OBWidth:FREQuency:SPAN:FULL

[:SENSe]:LSEQuencer:LTETdd:OBWidth:FREQuency:SPAN:PREVious

1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 339 340

Sem comentários

Agilent Technologies E6640A EXM Manual de Serviço Página 232