Agilent Technologies B2902 Manual de Serviço descarregar pdf (Página 281)

Agilent B2900 SCPI Command Reference, Edition 2 4- 159

Subsystem Commands

:TRIGger<:ACQuire|:TRANsient|[:ALL]>[:IMMediate]

Parameter delay Trigger delay, in seconds. value (0 to 100)|MINimum|

MAXimum|DEFault (default is 0). Parameter data type is

NRf+. Query does not support delay=value.

Query response response <newline>

response returns the present setting of trigger delay. If a parameter is specified,

response returns the value assigned to DEF, MIN, or MAX. Response data type is

NR3.

Example :TRIG:DEL 0.1

:TRIG2:TRAN:DEL?

:TRIGger<:ACQuire|:TRANsient|[:ALL]>[:IMMediate

]

Sends an immediate trigger for the specified device action to the specified channel.

When the status of the specified device action is initiated, the trigger causes the

specified device action.

Syntax :TRIGger<:ACQuire|:TRANsient|[:ALL]>[:IMMediate] [chanlist]

For <:ACQuire|:TRANsient|[:ALL]>, specify :ACQuire for measurement,

:TRANsient for source output, or :ALL for both device actions.

Parameter chanlist Channels. Parameter data type is channel list.

(@1)|(@2)|(@1,2)|(@1:2)|(@2,1)|(@2:1). See

“Channel List

Parameter” on page 1-8.

(@1) selects channel 1 only. (@2) selects channel 2 only. (@1,2), (@1:2), (@2,1),

and (@2:1) selects both channels 1 and 2.

If this parameter is not specified, chanlist=(@1) is set.

Example :TRIG:ACQ (@2)

:TRIGger<:ACQuire|:TRANsient|[:ALL]>:SOURce:L

Specifies one or more LXI triggers used for the trigger source for the specified

device action.

Syntax :TRIGger[c]<:ACQuire|:TRANsient|[:ALL]>:SOURce:LAN lan_id{,lan_id}

1 2 ... 276 277 278 279 280 281 282 283 284 285 286 ... 325 326

Sem comentários

Agilent Technologies B2902 Manual de Serviço Página 281