Agilent Technologies B2902 Manual de Serviço descarregar pdf (Página 279)

Agilent B2900 SCPI Command Reference, Edition 2 4- 157

Subsystem Commands

:INITiate[:IMMediate]<:ACQuire|:TRANsient|[:ALL]>

Initiates the specified device action for the specified channel. Trigger status is

changed from idle to initiated.

Syntax :INITiate[:IMMediate]<:ACQuire|:TRANsient|[:ALL]> [chanlist]

For <:ACQuire|:TRANsient|[:ALL]>, specify :ACQuire for measurement,

:TRANsient for source output, or :ALL for both device actions.

Parameter chanlist Channels. Parameter data type is channel list.

(@1)|(@2)|(@1,2)|(@1:2)|(@2,1)|(@2:1). See

“Channel List

Parameter” on page 1-8.

(@1) selects channel 1 only. (@2) selects channel 2 only. (@1,2), (@1:2), (@2,1),

and (@2:1) selects both channels 1 and 2.

If this parameter is not specified, chanlist=(@1) is set.

Example :INIT:ACQ (@2)

:TRIGger<:ACQuire|:TRANsient|[:ALL]>:BYPass

Enables or disables a bypass for the event detector in the trigger layer.

Syntax :TRIGger[c]<:ACQuire|:TRANsient|[:ALL]>:BYPass bypass

:TRIGger[c]<:ACQuire|:TRANsient>:BYPass?

For <:ACQuire|:TRANsient|[:ALL]> and <:ACQuire|:TRANsient>, specify

:ACQuire for measurement, :TRANsient for source output, or :ALL for both device

actions.

Parameter bypass Bypass setting. ONCE|OFF (default). Parameter data type is

CPD.

bypass=OFF disables the bypass.

bypass=ONCE enables the bypass, but only for the first passage.

Query response response <newline>

response returns the present setting of the bypass, OFF or ONCE. Response data

type is CRD.

Example :TRIG:BYP ONCE

1 2 ... 274 275 276 277 278 279 280 281 282 283 284 ... 325 326

Sem comentários

Agilent Technologies B2902 Manual de Serviço Página 279