Agilent Technologies 8922S Manual do Utilizador descarregar pdf (Página 5)

System Specifications

These specifications describe the system’s warranted

performance and apply after a 30 minute warm-up.

These specifications are valid over its operating

and environmental range, unless otherwise stated.

Supplemental Characteristics (shown in italics)

These are intended to provide additional informa-

tion, useful in applying the instrument by giving

typical (expected), but not warranted, performance

parameters. These characteristics are shown in

italics or labeled as “typical,” “usable to,” or “nominal.”

NOTE: The following specifications are only applica-

ble to firmware revision C.01.00 onwards.

GSM Functionality Specifications

Bit/frame error rate measurements: Class Ia, Ib, and

Class II bits in both raw and residual form, burst-by-burst

MS power output level control:

1 to 19 for E-GSM900

1 to 15 for GSM900

0 to 15 for DCS1800

0 to 15, 30, 31 for PCS1900

Broadcast channel capability: BCCH + CCCH or BCCH

+ CCCH + SDCCH/4

Control channels (SDCCH, FACCH, SACCH):

BCCH + CCCH, BCCH +CCCH + SDCCH/4, SDCCH/8

(non-hopped), SACCH/FACCH

Call control capabilities: BS originated call (FS/EFS),

MS originated call (FS/EFS), MS camp-on, BS call discon-

nect, MS call disconnect, hand-over, channel assignment,

interband hand-over

and interband channel assignment

Traffic channels: TCH (FS/EFS)

HSCSD: 2x1 and 2x2, 9.6 Kbps and 14.4 Kbps

Timing: Auto, manual, uplink-downlink and offset

measurement

Hopping: Two independent, user definable MA tables with

offsets. Intra band only.

Speech encoding/decoding: Full rate speech only

Speech echo mode: User selectable delay 0 to 5 seconds

Measurement coordination: Flexible control of burst type,

ARFCN, and timeslot

SACCH MEAS result—servicing cell: RXLEV, RXQUAL,

and timing advance

SACCH MEAS result—neighbor cell: RXLEV, ARFCN,

BCC, and NCC

RF Generator Specifications

RF In/Output connector frequency

Range: 880 to 960 MHz and 1805 to 1990 MHz

Resolution: 1 Hz

Accuracy: Reference accuracy ±0.5 Hz

Stability: Same as reference

RF In/Output Connector Output

Level range for specified accuracy:

-14 to -127 dBm (880 to 960 MHz)

-19 to -127 dBm (1805 to 1990 MHz)

Typical maximum output power:

>-12 dBm (880 to 960 MHz)

>-19 dBm (1805 to 1990 MHz)

Level resolution: 0.1 dB

Level accuracy (880 to 960 MHz)

±1.1 dB (0°C to 10°C)

±1.0 dB (10°C to 35°C)

±1.05 dB (35°C to 45°C)

±1.1 dB (45°C to 55°C)

Level accuracy (1805 to 1880 MHz): ±1 dB

±1 dB typical (1880 to 1990 MHz)

±1 dB typical while hopping

Reverse power: 15 W peak, 8 W average

(880 to 960 MHz while in GSM900 and E-GSM900 mode)

2 W continuous for all other frequencies and modes

Typical SWR: 1.5:1

Supplemental characteristics in E-GSM900 mode when

BCH is in GSM900 band and TCH is in DCS1800 band

BCH level at 0 dB attenuation: -60 dBm typical

Attenuator resolution: 10 dB steps

Attenuator range: 0 to 70 dB

Attenuator accuracy: ±1.7% of setting or ±0.4 dB,

whichever is greater

Level resolution for GSM900 BCH:

0.1 dB (when TCH in GSM900 band)

10 dB (when TCH in DCS1800 band)

Level accuracy:

TCH: ±1 dB typical

BCH: ±1 dB typical (when TCH in GSM900 band)

GSM Functionality and RF Generator Specifications

1. Dual band operation only.

2. Level accuracy degrades 0.2 dB when using RF In/Out connector for both RF

generator and RF analyzer.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comentários a estes Manuais

Sem comentários

Agilent Technologies 8922S Manual do Utilizador Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Agilent Technologies 8922S