Agilent Technologies N2782B Especificações descarregar pdf (Página 10)

Characteristics and specifications for N2750A Series InfiniiMode probes

Model number N2750A N2751A N2752A

Probe bandwidth* (–3 dB) 1.5 GHz 3.5 GHz 6 GHz

Rise time, probe only (10-90%) 233 psec 100 psec 58.3 psec

Input resistance (@DC)* 200k ± 2% (differential mode)

100k ± 2% (single-ended mode)

50k ± 2% (common mode)

Input capacitance 700 fF (with browser)

Attenuation ratio (@DC) 2:1 / 10:1

Input dynamic range ±1 V, 2 Vpp (@2:1) / ±5 V, 10 Vpp (@10:1)

Input common mode range ±15 V (from DC to 100 Hz), ±2.5 V (for >100 Hz) ***

Offset range ±15 V

Offset accuracy** < 3%

Maximum non-destructive

Input Voltage

±30 V (DC + peak AC)

Maximum number of probes supported

by 3000 X-Series

Maximum number of probes supported

by 4000 X-Series

* Denotes warranted electrical specifications at 2:1 attenuation mode after 20 minute warm-up, All others are typical.

** When calibrated on the oscilloscope, these characteristics are determined by the oscilloscope characteristics.

*** Assumes symmetric differential signals.

N2750A with browser tip N2750A with socketed tip N2750A with solder-in tip

For more information about the N2750A Series InfiniiMode probes, refer to the data sheet with the Agilent literature

number, 5991-0560EN.

InﬁniiMode Active Probes and Accessories (continued)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Sem comentários

Agilent Technologies N2782B Especificações Página 10