Agilent Technologies U2802A Manual do Utilizador Página 27

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 74
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 26
27
U2500A
Product specifications (continued)
Model number U2531A U2541A U2542A
Analog trigger
Trigger source All analog input channels, External analog trigger (EXTA_TRIG)
Trigger level
±Full scale for internal
±10 V for external
Trigger conditions Above high, below low, and window (software selectable)
Trigger level resolution 8 bits
Bandwidth 400 kHz
Input impedance for EXTA_TRIG 20 kΩ
Coupling DC
Overvoltage protection Continuous for ±35 V maximum
Digital trigger
Compatibility TTL/CMOS
Response Rising or falling edge
Pulse width 20 ns minimum
Calibration
[5]
On board reference voltage 5 V
Temperature drift ±2 ppm/°C
Stability ±6 ppm/1000 hours
Power consumption
Input voltage (DC) +12 VDC
Input current 480 mA maximum 390 mA maximum
Physical attributes
Dimensions (W × D × H)
120.00 mm × 182.40 mm × 44 mm (with plastic casing)
105.00 mm × 174.54 mm × 25.00 mm (without plastic casing)
IO connector 68-pin female VHDCI type
Weight
565 g with plastic casing
400 g without plastic casing
Environmental condition
Operating temperature 0 to 55 °C
Storage temperature –20 °C to 70 °C
Relative humidity 15% to 85% RH (non-condensing)
General
Remote interface Hi-Speed USB 2.0
Device class USBTMC-USB488
Programmable interface SCPI and IVI-COM
[1]
Maximum input voltage for analog input is ±10 V.
[2]
System Synchronous Interface (SSI) and star trigger commands are applicable when modular devices are used in modular product chassis (U2781A).
[3]
Maximum external reference voltage for analog output (AO_EXT_REF) is ±10 V.
[4]
Measurement frequency’s resolution:
= 12 MHz/n, n = 2, 3, 4, 5, ..., 120 M
= 6 MHz, 4 MHz, 3 MHz, 2.4 MHz, 2.0 MHz, ..., 0.1 Hz (up to six decimal points)
[5]
Recommended for 20 minutes warm-up time.
Vista de página 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 73 74

Comentários a estes Manuais

Sem comentários