Agilent-technologies J3972A Manual do Utilizador descarregar pdf (Página 108)

Bootp Server Configuration

Configuring the Bootptab File

Blank lines and lines beginning with # in the bootptab file are ignored. You

must include a colon and a backslash to continue a line. The ht tag must

precede the ha tag.

An example bootptab file is shown at the end of this procedure.

Table 4-3: Bootptab File Tags

2. Save the bootptab file after you have entered parameters for all of your

probes.

3. Verify the bootp process by performing one of the items in Table 4-4 on

page 89.

Tag Description

hn send nodename (Boolean flag, no “=value” is needed)

ht hardware type (ether); must precede ha tag

vm vendor magic cookie selector (must comply with RFC 1048)

ha hardware address (link-level or MAC address expressed in

hexadecimal); the probe’s hardware address is printed on a label

located on the Probe’s back panel.

ip Internet Protocol (IP) address for the Probe

sm subnet mask; this is required only if subnetting is being used

gw IP address of the gateway used when sending packets off the local

subnet; one default gateway may be configured

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 188 189

Sem comentários

Agilent-technologies J3972A Manual do Utilizador Página 108