Agilent Technologies J3916A Manual do Utilizador Página 121
- Página / 179
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Download New Firmware
Downloading Firmware using an HP-UX Workstation and a Terminal
101
Download Firmware to the Probe
Once the new firmware is installed on the HP-UX workstation, you can download
it to the probe.
Verify the following before you start the download procedure:
The probe is connected to the network.
The IP address, subnet mask, and default gateway of the probe are
configured correctly.
A terminal (or a PC running terminal emulator software) is attached to the
probe’s RS-232 port (using a null modem cable). Configure the
communication link for 8 bits per character, 1 stop bit, no parity, Xon/Xoff
handshaking, and a baud rate of 9600.
You will also need the IP address of the HP-UX workstation.
Use the following procedure to download firmware to your probe from the
HP-UX workstation using a terminal:
CAUTION
The probe executes a cold start if you press the CONFIG button twice within one
second. If this happens, wait for the cold start to be completed (about 45 seconds)
and then press the CONFIG button again to enter the configuration mode.
1. Press the CONFIG button on the back of the probe once. The probe’s Main
Menu, as shown in Figure 6-1 on page 102, is displayed on the console.
NOTE
The probe’s CONFIG button is recessed. This requires the use of a narrow,
pointed object (like a pen) to press the CONFIG button.
A warm start or cold start is completed when the Fault LED goes off. If traffic is
present, the Activity LED flashes to show traffic.
- Agilent J3916A HSSI WanProbe 1
- Consumer Warranty Statement 2
- Operating Restrictions 4
- Safety Information 7
- Conventions Used in this Book 9
- Trademarks 10
- Printing History 11
- Additional Help 11
- Contents 13
- Introduction 21
- Figure 1-1: The Probe 23
- Probe Overview 25
- Agilent HSSI WanProbe 26
- Supported MIBs 27
- Management Stations 28
- Access Security 28
- Status LEDs 30
- Rear Panel Telemetry LEDs 31
- Figure 1-4: Rear Panel LEDs 32
- CONFIG Button 33
- Included Parts 34
- Optional Accessories 34
- Local Terminal Configuration 35
- Using the Main Menu 39
- Figure 2-1: Probe Rear Panel 40
- Figure 2-2: Probe Main Menu 41
- Modify/View Security Values 44
- Modify/View Interface Values 45
- Display Interface Summary 56
- Installation 61
- Selecting a Location 63
- Installing the Probe 64
- Table Installation 65
- Rack or Cabinet Installation 65
- Wall Installation 67
- Connecting the Probe 69
- 100Base-T 70
- HSSI Monitor Connections 76
- Ethernet 77
- Direct Connection 79
- Modem Connection 80
- Install the Probe’s Modem 82
- Data Switch Connection 85
- Starting the Probe 87
- Verifying the Installation 88
- Out-of-Band Troubleshooting 89
- Ethernet Telemetry Interface 89
- HSSI Troubleshooting 90
- Bootp Server Type 94
- HP Sun PC 94
- Using Microsoft LAN Manager 100
- Using Novell NetWare 102
- Bootp Server Configuration 104
- Bootp Server Setup on a PC 104
- Configuring the Bootptab File 105
- Tag Description 106
- Server Verification Process 107
- Example Bootptab File 108
- Probe Operation 109
- Restarting the Probe 111
- Cycling Power 113
- Figure 5-1: Probe Main Menu 114
- Cold Start 115
- Download New Firmware 117
- Terminal 124
- Xmodem Download of Firmware 128
- Cables and Connectors 133
- HSSI Connectors and Cables 135
- HSSI Null Modem Cable 136
- Token-Ring Cables 138
- Agilent Product 139
- Cable Connector Pin-Outs 140
- UTP Network Connector Pin-Out 143
- STP Network Connector Pin-Out 144
- Specifications 145
- Probe Memory Allocation 148
- Parameter 32MB 64MB 128MB 149
- Glossary 151
- Numerics 171
Manuais e produtos relacionados com Redes Agilent Technologies J3916A
Redes Agilent Technologies N2620A Manual do Utilizador
(182 páginas)
(182 páginas)
Redes Agilent Technologies 8922M Guia do Utilizador
(384 páginas)
(384 páginas)
Redes Agilent Technologies 81680A Guia do Utilizador
(112 páginas)
(112 páginas)
Redes Agilent Technologies E6392B Guia do Utilizador
(206 páginas)
(206 páginas)
Redes Agilent Technologies 8922S Guia do Utilizador
(100 páginas)
(100 páginas)
Redes Agilent Technologies 8922S Especificações
(244 páginas)
(244 páginas)
Redes Agilent Technologies E6392B Especificações
(197 páginas)
(197 páginas)
Redes Agilent Technologies 1100 Series Manual de Serviço
(318 páginas)
(318 páginas)
Redes Agilent Technologies E6474A Guia do Utilizador
(224 páginas)
(224 páginas)
Redes Agilent Technologies E6701A Guia do Utilizador
(251 páginas)
(251 páginas)
Sony MDR-EX57LP Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Audio Sony MDR-EX57LP.
Wir stellen 1 PDF-Handbücher Sony MDR-EX57LP zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Comentários a estes Manuais