Agilent Technologies 81642A Manual do Utilizador descarregar pdf (Página 22)

Agilent 81624B Agilent 81624B Agilent 81626B Agilent 81626B

Calibration Option C01/C02 Calibration Option C01/C02

Sensor Element InGaAs, ø 5 mm InGaAs, ø 5mm

Wavelength Range 800 nm to 1700 nm 850 nm to 1650nm

Power Range –90 dBm to +10 dBm –70 to +27 dBm (1250 nm to 1650 nm)

–70 to +23 dBm (850 nm to 1650 nm)

Applicable Fiber Type Open Beam Standard SM and MM max 100 µm core size, NA ≤0.3 Standard SM and MM max 100 µm core size, NA ≤0.3

Parallel beam max ø 4 mm Parallel beam max ø 4 mm

Uncertainty at Reference Conditions ±2.2 % ±1.5 % ±3.0 % ±2.5 %

(1000 nm to 1630 nm) (970 nm to 1630 nm) (950 nm to 1630 nm) (950 nm to 1630 nm)

Total Uncertainty ±3.5% ± 5 pW ±2.8% ± 5 pW ±5.0% ± 500 pW ±4.5% ± 500 pW

(970 nm to 1630 nm) (950 nm to 1630 nm) (950 to 1630 nm max 23 dBm) (1250 to 1630 nm max 27 dBm)

Relative Uncertainty

– due to polarization ≤ ±0.005 dB (typ. ±0.002 dB) ≤ ±0.005 dB (typ. ±0.002 dB)

– spectral ripple (due to interference) ±0.005 dB (typ. <±0.002 dB) ≤ ±0.005 dB (typ. <±0.002 dB)

Linearity (power) CW –70 dBm to +10 dBm, 1000 nm to 1630 nm CW –50 dBm to +27dBm, 950 nm to 1630 nm

– at 23°C ±5°C <±0.02 dB <±0.04 dB

– at operat. temp. range <±0.05 dB <±0.15 dB

Return Loss typ. 60 dB >45 dB >47 dB

Noise (peak to peak) <5 pW <500 pW

Averaging Time (min.) 100 µs 100 µs

Analog Output included Included

Dimensions 57 mm x 66 mm x 156 mm 57 mm x 66 mm x 156 mm

Weight 0.5 kg 0.5 kg

Recommended Recalibration Period 2 years 2 years

Operating Temperature 0°C to 40°C 0°C to +35°C

Humidity Non-condensing Non-condensing

Warm-up Time 40 min 40 min

Agilent 81628B with Integrating Sphere

Sensor Element InGaAs

Wavelength Range 800 nm to 1700 nm

Power Range –60 dBm to +40 dBm (800 nm to 1700 nm) For operation higher than 34 dBm

Damage Power 40.5 dBm

Applicable Fiber Type Single mode NA ≤0.2, Multimode NA ≤0.4

Open Beam ø ≤3 mm center of sphere

Uncertainty at Reference Conditions ±3.0 % (970 nm to 1630 nm)

Total Uncertainty (970 nm to 1630 nm)

≤10 dBm ±4.0% ± 5 nW

>10 dBm to ≤20 dBm ±4.5%

>20 dBm to ≤38 dBm ±5%

Relative Uncertainty

– due to polarization typ. ≤±0.006 dB

– due to speckle noise at source linewidth: typ. ≤±0.02 dB

0.1 pm to 100 pm >100 pm typ. ≤±0.002 dB

Linearity (power) (CW –40 dBm to +38 dBm), (970 nm to 1630 nm)

≤10 dBm ≤±0.03 dB

>10 dBm to ≤20 dBm ≤±0.06 dB

>20 dBm to ≤37 dBm ≤±0.09 dB

>37 dBm to ≤38 dBm ≤±0.10 dB

at 23°C ± 5°C, for operating temperature range add ±0.03 dB

Return Loss typ. >75 dB

Noise (peak to peak) <5 nW

Averaging Time (minimal) 100 µs

Analog Output Included

Dimensions 55 mm x 80 mm x 250 mm Operating Temperature 0°C to +40°C

Weight 0.9 kg (without heat sink) Humidity Non-condensing

Recommended Recalibration Period 2 years Warm-up Time 40 min

For optical power higher than 34 dBm the attached heat sink MUST be used! For continuous optical power or average optical power higher than 38 dBm the connector adapters will get warmer

than permitted according to the safety standard IEC 61010-1. The 81628B Optical Head can handle optical power up to 40 dBm, however, operation above 38 dBm is at the operator’s own risk.

Agilent Technologies Deutschland GmbH will not be liable for any damage caused by an operation above 38 dBm.

www.agilent.com/comms/lightwave

Response Modules

Agilent 8163xA/B and 8162xB Optical Power Meter (cont.)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Comentários a estes Manuais

Sem comentários

Agilent Technologies 81642A Manual do Utilizador Página 22

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Agilent Technologies 81642A