Agilent Technologies 8000 Series Especificações descarregar pdf (Página 124)

Chapter 6: Replacing Assemblies

To replace the Intel motherboard with the ADLINK motherboard

124

To replace the Intel motherboard with the ADLINK motherboard

When replacing an Intel motherboard with an ADLINK motherboard order the D8104-68700

M880 Motherboard Kit and follow these instructions.

Remove the CD-ROM drive using the instructions beginning on page 102.

2 Remove all cables from the PCI cards.

3 Remove all PCI cards from the motherboard.

4 Disconnect all cables from the motherboard.

5 Remove the six 5 mm port lock screws from the rear panel connectors.

6 Remove the 5 short and 3 long Torx T10 screws holding the motherboard to the ATX

tray.

Figure 6-29

Removing the motherboard

7 Remove the 8 T20 screws holding the tray to the rear panel.

8 Remove the 3 T10 screws holding the filler plate to rear panel and tray.

9 Remove the hard disk drive using the instructions beginning on page 120.

10 Lift tray with old motherboard from rear and slide to clear the rear panel clearing the

three long standoffs under the tray remove the tray from the chassis.

Port lock

screws (6)

Torx T10

screws (8)

PCI cards

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 161 162

Sem comentários

Agilent Technologies 8000 Series Especificações Página 124