Agilent Technologies 6813B Manual do Utilizador Página 51
- Página / 91
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Front Panel Operation - 4
51
Step Transient
The Voltage Menu lets you specify an alternate or triggered voltage level that the ac source will apply to
the output when it receives a trigger. Because the default transient voltage level is zero volts, you must
first enter a triggered voltage before you can trigger the ac source to change the output amplitude. Refer
to Chapter 4 of the Programming Guide for more information about programming triggers.
In the following example, the voltage output is set to 120 Vrms and then stepped down to 102 Vrms.
Action Display
1.
On the Function keypad, press Output On/Off to enable the output. The Dis
annunciator will go off.
0 V 60 Hz
2.
Press Voltage to access the Voltage Menu. On the Entry keypad, press 1 2 0 Enter.
VOLT 120
3. Access the Voltage Menu again and press ô to access the triggered voltage
command.
VOLT:T 0
4.
On the Entry kepad, press 1 0 2 Enter.
VOLT:T 102
5. Access the Voltage Menu again and press ô to access the voltage mode command. It
should be in the default FIXED mode. An ac source function in the FIXED mode
does not respond to triggers. On the Entry keypad, press ¯ or ° to scroll through the
mode parameters. When you have STEP, press Enter.
VOLT:M STEP
6.
Press Trigger Control and Enter. This initiates (or enables) one immediate trigger
action.
INIT:IMMED
7.
Press Shift Trigger. This sends the ac source an immediate trigger signal to change
the output voltage. The triggered voltage value now becomes the VOLT value.
102 V 60 HZ
Pulse Transient
In the following example, the output is four 83.3-millisecond, 120 Vrms pulses at 60 Hz. The figure
shows the trigger, pulse count, pulse period, and duty cycle.
NOTE: From the Output Menu, execute the *RST command to reset the ac source. This is
necessary because any previously programmed functions remain in effect until cleared.
Figure 4-5. Pulse Transients
120Vrms
Trigger
83.3ms
250ms
count = 4
102Vrms
- User’s Guide 1
- Warranty Information 2
- Safety Summary 3
- Declaration Page 5
- Acoustic Noise Information 6
- Printing History 6
- Table of Contents 7
- 3 TURN-ON CHECKOUT 31 8
- 4 FRONT PANEL OPERATION 37 8
- A SPECIFICATIONS 59 8
- C ERROR MESSAGES 81 9
- D LINE VOLTAGE CONVERSION 85 9
- INDEX 87 9
- General Information 11
- Options and Parts 12
- Description 13
- Front Panel/Remote Operation 14
- Peak Current Limit 16
- Peak Inrush Example 16
- ♦ as voltage increases, the I 17
- Voltage Regulation 18
- Output Impedance 18
- RMS Current Limit Circuit 18
- Output Coupling 19
- Installation 21
- Bench Operation 22
- Rack Mounting 22
- Input Connections 23
- L1 L2(N) 24
- Remote Sense Connections 25
- Trigger Connections 27
- Digital Connections 27
- GPIB Connector 28
- RS-232 Interface 29
- Turn-On Checkout 31
- Using the Keypad 32
- Checkout Procedure 32
- In Case of Trouble 34
- Line Fuse 35
- Front panel Operation 37
- System Keys 39
- Function Keys 40
- Meter Display Keys 41
- Output Control Keys 42
- Shift Phase 43
- Shift Output 43
- StatusShift 44
- Trigger and List Control Keys 45
- Entry Keys 46
- 3 - Setting the DC Offset 48
- 1 SLEW:MODE FIXED 55
- 2 SLEW:MODE STEP 55
- 3 SLEW:MODE PULSE 55
- 4 SLEW:MODE LIST 55
- Specifications 59
- A - Specifications 60
- Supplemental Characteristics 61
- Operation Below 45 Hz 63
- Verification and Calibration 65
- Test Setup 66
- Turn-On Checkout Procedure 67
- RMS Current Accuracy Test 68
- Table B-3 (continued) 70
- Front Panel Calibration Menu 71
- Front Panel Calibration 72
- Calibration Error Messages 76
- Calibration Over the GPIB 76
- Error Messages 81
- C - Error Messages 82
- Error Messages - C 83
- Line Voltage Conversion 85
- Close the Unit 86
- Manual Updates 91
Manuais e produtos relacionados com Medição, teste e controlo Agilent Technologies 6813B
(108 páginas)
(221 páginas)Melissa 240-100 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Odkurzacze Melissa 240-100.
Dostarczamy 1 pdf podręczników Melissa 240-100 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Comentários a estes Manuais