Agilent-technologies Agilent E6474A Manual do Utilizador descarregar pdf (Página 52)

52 Agilent E6474A User’s Guide

3 Set Up Your System

Method 1 - In-vehicle chassis

Connect using the in-vehicle chassis. Data and GPS information

is passed to your PC through the E6473B hub. See Figure 22 on

page 52.

Figure 22 GPS/DR system fitted into the in-vehicle chassis (shown

with the E6473B hub)

Method 2 - USB connection

If the GPS/DR unit can not be fitted to the in-vehicle chassis it is

possible to use the downstream USB port. Power is provided

from the power socket at the back of the unit (power cable

E6473-60004).

Method 3 - Serial connection

You can use the serial port on the back of the GPS/DR unit

(refer to Figure 23). Connect this port to the serial port on your

PC.

The GPS/DR serial port overrides the USB port.

Figure 23 Serial port on GPS/DR unit

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 183 184

Sem comentários

Agilent-technologies Agilent E6474A Manual do Utilizador Página 52