Agilent Technologies EXG Guia do Utilizador descarregar pdf (Página 141)

Checking the Voltage Setting

A-2 Setting Up Your Cardiograph

2. Verify that the correct voltage is visible on the voltage select switch. If the

voltage setting is incorrect, slide the voltage switch so the correct voltage

is visible. The cardiograph operates with a line frequency of either 50 or

60 Hz.

3. Remove and discard the label covering the AC power receptacle. See

Figure A-1 for the location of the AC power respectable. You are required

to remove the label as a reminder to check the setting of the voltage select

switch.

CAUTION The cardiograph can be damaged if plugged into the incorrect voltage.

NOTE The nominal 115 VAC voltage setting works for any voltage between 100–

120 VAC. The nominal 230 VAC voltage setting works equally well for any

voltage between 220–240 VAC.

Figure A-1: Rear View of Cardiograph

A. Equipotential Connector

B. AC Power Receptacle

C. Voltage Select Switch

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 194 195

Sem comentários

Agilent Technologies EXG Guia do Utilizador Página 141