Agilent Technologies 81680A Guia do Utilizador descarregar pdf (Página 107)

Additional Cleaning Information Cleaning Information

Agilent 81618A/9A and Agilent 81623B/4B/6B/8B Optical Heads, Fourth Edition

107

3 Wash off the emulsion with water, being careful to remove it all, as any

remaining streaks can impair measurement accuracy.

4 Take a new, dry soft tissue and remove the water, by rubbing gently over

the surface using a small circular movement.

5 Blow away remaining lint with compressed air.

Alternative Procedure A

To clean lenses that are extremely sensitive to mechanical stress or

pressure you can also use an optical clean polymer film. This procedure is

time-consuming, but you avoid scratching or destroying the surface.

1 Put the film on the surface and wait at least 30 minutes to make sure

that the film has had enough time to dry.

2 Remove the film and any dirt with special adhesive tapes.

Alternative Procedure B

If your lens is sensitive to water then:

1 Moisten the lens or the mirror with isopropyl alcohol.

2 Take a new, dry soft tissue and remove the alcohol, dissolved sediment

and dust, by rubbing gently over the surface using a small circular

movement.

3 Blow away remaining lint with compressed air.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112

Sem comentários

Agilent Technologies 81680A Guia do Utilizador Página 107