
Thermo Scientific Agilent 1100 Series Connecting the Hardware and Triggering Data Acquisition 11
3
Specifying the TCP/IP Settings and the BCD Board
Location
The Agilent 1100 Series devices query the PC for the stack IP address only during their start
up procedure. Therefore, complete the following procedure, and ensure that the Xcalibur
Home Page window is open before you turn on the Agilent 1100 Series devices.
Assigning Contact Closure Control to the Autosampler
Y To assign contact closure control to the Agilent 1100 Series autosampler
1. Depending on the Xcalibur data system version, do one of the following:
• Choose Start > All Programs > Xcalibur > Instrument Configuration.
The Instrument Configuration dialog box appears.
• Choose Start > All Programs > Thermo Foundation 1.0 > Instrument
Configuration.
The Thermo Foundation Instrument Configuration dialog box appears.
2. In the Available Devices area, double-click the Agilent 1100 AS button.
A copy of the Agilent 1100 AS button appears in the Configured Devices area.
3. In the Configured Devices area, double-click the Agilent 1100 AS button.
The Agilent 1100 Autosampler dialog box appears.
4. Click the General tab.
The General page appears (see Figure 6 on page 12).
Contents
• Assigning Contact Closure Control to the Autosampler
• Specifying the TCP/IP Settings
Comentários a estes Manuais