Agilent Technologies U2802A Manual do Utilizador descarregar pdf (Página 5)

dataTec GmbH ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ info@datatec.de ▪ www.datatec-gruppe.de

USB DAQ, U2300A MF DAQ

Quick comparison: Basic DAQ table

U2351A U2352A U2353A U2354A

Analog input

Resolution 16 bits, no missing codes

Number of channels 16 single-ended / 8 differential (software selectable per channel)

Maximum sampling rate/ch (250 kSa/s)/#

of channels used (500 kSa/s)/#

of channels used

Scan list memory Up to 100 selectable channel entries

Analog output

Resolution 16 bits n/a 16 bits n/a

Number of channels 2 n/a 2 n/a

Maximum update rate 1 MSa/s n/a 1 MSa/s n/a

Function generator mode Sine, square, triangle,

sawtooth, and noise

n/a Sine, square, triangle,

sawtooth, and noise

n/a

Digital I/O

Number of channels 24-bit programmable input/output

Compatibility TTL

General purpose digital counter

Maximum count (2

– 1) bits

Number of channels Two independent up/down counters

Input frequency range 0.1 Hz to 6 MHz at 50% duty cycle

Calibration

On-board reference voltage 5 V

Temperature drift ±2 ppm/ºC

Stability ±6 ppm/1000 hrs

1. Denotes number

2. 20-minute warm up time recommended

Quick comparison: High-density DAQ

U2355A U2356A U2331A

Analog input

Resolution 16 bits, no missing codes 16 bits, no missing codes 12 bits, no missing codes

Number of channels 64 single-ended/32 differential (software selectable per channel)

Maximum sampling rate/ch (250 kSa/s)/

of channels used)

(500 kSa/s)/

of channels used)

Single channel: 3 MSa/s

Multiple channels: 1 MSa/s

Scan list memory Up to 100 selectable channel entries

Analog output

Resolution 12 bits

Number of channels 2

Maximum update rate 1 MSa/s

Function generator mode Sine, square, triangle, sawtooth, and noise waveforms

Digital I/O

Number of channels 24-bit programmable input/output

Compatibility TTL

General purpose digital counter

Maximum count (2

– 1) bits

Number of channels Two independent up/down counters

Input frequency range 0.1 Hz to 6 MHz at 50% duty cycle

Calibration

On-board reference voltage 5 V

Temperature drift ±2 ppm/ºC

Stability ±6 ppm/1000 hrs

3. Denotes number

4. 20-minute warm up time recommended

1 2 3 4 5 6 7 8 9 10 ... 23 24

Comentários a estes Manuais

Sem comentários

Agilent Technologies U2802A Manual do Utilizador Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com Multímetros Agilent Technologies U2802A