Agilent Technologies E7495A RF Manual do Utilizador descarregar pdf (Página 13)

Power meter Option 600

Display

Range: –100 dBm to +100 dBm

(range is power sensor dependent)

Display limits: ± 100 dBm (user settable)

Resolution: Settable 1.0, 0.1, 0.01, 0.001 in logarithmic mode,

or 1, 2, 3, or 4 significant digits in linear mode

Accuracy

Instrumentation:

Absolute: ± 0.02 dB (log) or ± 0.5 % (linear). Add the

corresponding power sensor linearity percentage.

Relative: ± 0.04 dB (log) or ± 1.0 % (linear). Add the

corresponding power sensor linearity percentage.

Zero set:

Zero set is the digital zero with a power sensor: ± 50 nW

Power reference:

Power output: 1.00 mW (0.0 dBm) traceable to the U.S. National

Institute of Standards and Technology (NIST).

Accuracy: ± 1.2 % worst case (± 0.9 % rss) for one year.

SWR: < 1.08

External attenuator

Max power: 100 W

Attenuation: 40 dB ± 0.5 dB

Power meter Option 600 with Agilent N8482A-CFT power sensor

(also supports Agilent 8481A/D and 8484A power sensors)

Frequency range: 100 KHz to 6 GHz

Dynamic Range: –30 dBm to +20 dBm

Measurement noise: < 114 nW

Zero drift: < ± 7 nW

EEPROM feature is disabled to maintain backward compatibility with 8480 Series

T1 analyzer Option 700

Features:

Receive level: (Line 1 and line 2) +6 dB DSC to –36 DB DSX or

100 mv p-to-p to 12 v p-to-p

Receive frequency display receive frequency

(5 ppm) (line 1 and line 2) “Loop-back” control

send CSU or NIU loop codes CSU/NIU emulation

respond to CSU or NIU loop codes

Electrical interface

Connectors, RX, TX: Primary and secondary ports

Output: Conforms to TR-TSY-000499, CCITT Rec.G.703

AT&T Pubs CB113, CB119, CB132, CB143

PUB62508 and PUB62411 pulse shape

specifications when terminated in 100 Ω and

0 dB line build-out is selected

Line build-out: 0 dB, –7.5 dB, –15 dB

Input:

Terminate: DSX +6 dB to DSX –36 dB, 100 Ω

Monitor: DSX –14 dB to DSX –40 dB, 100 Ω

Bridge: DSX +6 dB to DSX –36 dB, > 1000 Ω

Clock: 1.544 MHz

Internal: ± 5 ppm

External: ± 300 ppm

Recovered: ± 300 ppm

Transmitter and receiver

Framing: Unframed, D3/D4 & ESF

Channel formats: Full T1, 64x1

Test patterns: QRSS, all Os, 1:7, 2 in 8, 3 in 24, all 1s,

T-1-Daly, 55 OCTET

Error injection

Type: BPV, frame, CRC, pattern (logic)

Error rate: Single

Alarm inject

Type: LOS, LOF, yellow, AIS, idle (CDI)

E1 analyzer Option 710

Features

Error detect: Code (BPV), FAS, MFAS,CRC-4, far end block

(FEBE), pattern, frame slip

Error rate calculation: Bit-error-rate, error free seconds, errored seconds

Alarm detect: AIS, TS-16 AIS, FAST DISTANT, MFAS DISTANT

Clock and frame slips:

Clock slips, frame slips, peak wander, clock slip rate

Auto configuration: Automatically detect line code, framing and

test pattern

Receive level

(line 1 and line 2): +6 dB DSX to –36 dB DSX or 100 mv p-to-p

to 12 v p-to-p

Receive frequency (line1):

Display receive frequency (± 5 ppm)

Channel access: output audio to system

Delay measurement: Measure delay in unit intervals for

“looped-back” signal

Electrical interface

Connectors, RX, TX: Primary and secondary ports

Output: Conforms to ITU-T Rec.G.703

Line code: AMI, HDB3

Impedance:

Terminate: 75 Ω ± 5 % bridge: > 1000 Ω

Input: Terminate: DSX +6 dB to DSX –36 dB

Bridge: DSX +6 dB to DSX –36 dB

Clock: 2.048 MHz

Internal: ± 5 ppm

External: ± 300 ppm

Recovered: ± 300 ppm

Transmitter and receiver

Framing: Unframed, PCM-30, PCM-30 with CRC, PCM-31,

PCM-31 with CRC

Channel formats: Full E1, 64x1

Test patterns:

(True or Inverse, ITU Rec) 2

-1 (Q6 & Q5), 2

-1 (V.52),

-1 (0.152), 2

-1 (0.151) 2

-1 (V.57), QRSS,

-1 (0.151), all 0’s, 1:7, 1:3, 1:1, all 1’s

Error injection

Type: Code (BPV), FAS, MFAS, CRC-4, far end block

(FEBE), pattern

Error rate: Single

Alarm generation AIS, TS-16 AIS, FAS DISTANT,

MFAS DISTANT, loss of signal, loss of frame

1 2 ... 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários

Agilent Technologies E7495A RF Manual do Utilizador Página 13

Comentários a estes Manuais

Manuais e produtos relacionados com Multímetros Agilent Technologies E7495A RF