Agilent Technologies 8935 Series Manual do Utilizador descarregar pdf (Página 5)

AM Measurement

Frequency Range: 10 MHz to 1 GHz (usable to 400 kHz), 1.7 GHz

to 2.0 GHz

Depth: 0 to 95%

Input Level Range (levels in PEP):

–6 dBm to +52 dBm at RF IN/OUT

–44 dBm to +14 dBm at ANT IN

Supplemental Characteristics

Accuracy: ±5% of reading ±1.5% AM (50 Hz to 10 kHz rates,

modulation <80%)

THD + Noise: <2% rms for modulation <80% AM

(at 1 kHz rate in a 0.3 to 3 kHz bandwidth)

Residual AM: <0.2% in a 0.3 to 3 kHz bandwidth

Resolution: 0.1%

Spectrum Analyzer

Frequency Range: 400 kHz to 1 GHz, 1.4 GHz to

2.0 GHz

Frequency Span/Resolution Bandwidth (coupled)

Span Bandwidth

<50 kHz 300 Hz

<200 kHz 1 kHz

<1.5 MHz 3 kHz

<18 MHz 30 kHz

>18 MHz 300 kHz

Span Capability:

Full span capability 1 GHz

Display: Log with 1, 2, and 10 dB per division

Display Range: 80 dB or 8 divisions

Reference Level Range: +50 dBm to –50 dBm

Residual Responses: <–70 dBm (ANT IN port, no input

signal, 0 dB attenuation)

Image rejection: >50 dB

Supplemental Characteristics

Non-Harmonic Spurious Responses:

>65 dB down (for input signals ≥50 MHz, <–30 dBm),

>55 dB down (for input signals <50 MHz, <–30 dBm).

Log Scale Linearity: ±2 dB (for input levels

<–30 dBm within 6 divisions of reference level

Displayed Average Noise Level: <–114 dBm, for

<50 kHz span, –50 dBm reference level

Level Accuracy (at center frequency and within

one division of reference level): ±2.5 dB

2. Center frequency must be <1.0 GHz or between 1.7 GHz to 2.0 GHz. Portions of

the 1 GHz span which are outside of the analyzer’s frequency range are truncated.

Tracking Generator

Tracking Generator Frequency Range: 400 kHz to 1 GHz,

1.7 GHz to 2.0 GHz

Frequency Offset: Frequency span endpoints ± frequency offset

cannot be <400 kHz or >1 GHz in the 1 GHz band and cannot be

<1.7 GHz or >2.0 GHz in the 2 GHz band.

Output Level Range: Same as signal generator on page 3.

Sweep Modes: Normal and inverted

Oscilloscope Specifications

Frequency Range: 2 Hz to 50 kHz (3 dB BW)

Scale/Division: 10 mV to 10 V

Amplitude Accuracy: ±1.5 % of reading ±0.1 division (20 Hz to

10 kHz)

Time/Division: 10 µsec to 100 msec

Trigger Delay: 20 µsec to 3.2 seconds

Supplemental Characteristics

3 dB Bandwidth: Typically >100 kHz

Internal DC Offset: <0.1 div (>50 µV/div sensitivity)

AF Analyzer Specifications

Frequency Measurement

Measurement Range: 20 Hz to 400 kHz

Accuracy: ±0.02% plus 0.1 Hz plus timebase accuracy

External Input: 20 mV to 30 Vrms

Supplemental Characteristics

Resolution: 0.01 Hz, f <10 kHz; 0.1 Hz, f <100 kHz; and

1 Hz for f >100 kHz

AC Voltage Measurement

Measurement Range: 0 to 30 Vrms

Accuracy: ±3% of reading (20 Hz to 15 kHz, inputs >1 mV)

Residual Noise: 150 µV (15 kHz LPF) 450 µV (>99 kHz LPF)

Supplemental Characteristics

3 dB Bandwidth: Typically 2 Hz to 100 kHz

Nominal Input Impedance: Switchable between 1 MΩ in parallel

with 95 pF or 600 Ω floating

Minimum Resolution: 4 digits for inputs >100 mV; 3 digits for

inputs <100 mV

1 2 3 4 5 6 7 8

Comentários a estes Manuais

Sem comentários

Agilent Technologies 8935 Series Manual do Utilizador Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com Multímetros Agilent Technologies 8935 Series