Agilent Technologies 16800 Series Manual do Utilizador descarregar pdf (Página 5)

5

A quick tour of the application (continued)

Measurement setup step 1: Establish

a connection between the logic

analyzer and the logic analyzer

interface

The FPGA dynamic probe

application establishes a

connection between the logic

analyzer and the FPGA via a

JTAG cable. It also determines

what devices are on the JTAG

scan chain and lets you pick the

one with which you wish to

communicate.

Measurement setup step 2: Configure

the device and import signal names

If needed, you can configure the

device with the SRAM object file

(.sof) that includes the logic

analyzer interface file. The FPGA

dynamic probe application reads

a .lai file produced by Quartus II.

The names of signals you measure

will now automatically appear in

the label names on your Agilent

logic analyzer.

Measurement setup step 3: Map

FPGA pins

Select your probe type and easily

provide the information needed

for the logic analyzer to

automatically track names of

signals routed through the logic

analyzer interface file.

1 2 3 4 5 6 7 8

Comentários a estes Manuais

Sem comentários