Agilent Technologies E8401A Manual do Utilizador descarregar pdf (Página 3)

STEP Dionysos Job: 210%XXXX5403-0003 5966-2919E Comp: 04-28-00 Time: 11:02 OP: NN

PDFINFO H 2 9 1 9 - 0 3

VXI

plug&play

Compliant Adapter Kit

The VXI

plug&play

Compliant Adapter Kit (Opt. 925 or E8400-

80925) provides rack mounting compatible with the

VXI

plug&play

VPP-8 Specification for ease of interconnect

with MAC Panel, Virginia Panel, TTI Testron or other

VXI

plug&play

-compatible ICA receivers. The Adapter Kit

locates the mainframe in the position prescribed by the

VXI

plug&play

Systems Alliance and provides four mounting

holes for attachment of the receiver adapter frame. The

VXI

plug&play

Compliant Adapter Kit requires the E3663A

Support Rail Kit or the 1494-0411 Rack Slide Kit.

Electromagnetic Compliance (EMC) Accessories

The standard mainframe is suitable for the majority of

applications. However, for EMC applications, a Chassis Shield

Kit, Backplane Connector Shields, and EMC Filler Panels are

available.

Chassis Shield Kit

The Chassis Shield Kit (E8400-80919) is used to provide

additional isolation or shielding between noisy or sensitive

modules. These newly designed, patent pending chassis

shields are easy to install and are grounded in all four corners.

Backplane Connector Shields

Backplane Connector Shields (Opt. 918 or E8400-80918) are

useful for improving the ground connection between a

module and the backplane. For a few modules, they are

necessary for EMC compliance to EN55011 and CISPR11. For

the vast majority of modules, they are not necessary. Note

that these shields are

only

useful

the module includes

contacts conforming to VXI Spec B.7.2.3.

EMC Filler Panels

EMC Filler Panels (E8400-60202) are used to provide a

continuous connection across the front opening of the

mainframe. All Agilent modules include EMC contacts to the

adjacent slot. Using EMC Filler Panels in the empty slots

completes the connection and reduces radiated emissions and

increases radiated and ESD immunity.

Optional Air Filter

Air filters are not necessary on these mainframes. However,

an optional Air Filter Kit (E8395A) is available for use in

demanding environments. The airflow is reduced less than

10% with a clean air filter installed.

Cable Routing

In rack-mount installations, cables can be routed to the front

of the mainframe or from below the mainframe.

The optional Cable Tray (E8393A) allows cable routing under

the mainframe. The Cable Tray may be mounted to provide

three different heights: one EIA rack unit (44.5mm), two EIA

rack units, and halfway between one and two EIA rack units.

It is compatible with the E3664A Support Rail Kit and the

1494-0411 Rack Slide Kit. If the mainframe is used on a

benchtop, the mainframe feet may be removed and reinstalled

on the bottom of the Cable Tray.

Optional Door

An optional Tinted Acrylic Door (Opt. 915 or E8400-80915) is

available for use in rack-mount installations. All of the

modules installed in the mainframe are accessible when this

door is open. The door hinges on the right so that its latch

mechanism occupies the space outside Slot 0, allowing the

door to close with the minimum recess into the rack. Its

hinges are a lift-off type so that the door may be easily

removed when open. It is fabricated of acrylic to provide

adequate strength and superior scratch resistance when

compared to polycarbonate.

The Tinted Acrylic Door Kit requires and is compatible with

the Standard Adapter Kit (E8394A) only.

The mainframe documentation consists of a User and Service

Manual. The manual is distributed on the Agilent Universal

Instrument Drivers CD-ROM supplied with the mainframe and

a variety of other Agilent VXI products. It is also available on

the Agilent Technologies Website. This documentation

describes all mechanical aspects for the mainframe and its

accessories. A printed copy of this manual is also included.

Documentation

Agilent Technologies provides a standard 3-year return-to-

Agilent warranty on this mainframe. Opt. W01 converts the

standard warranty to 1-year on-site.

Warranty

1 2 3 4 5 6 7

Comentários a estes Manuais

Sem comentários

Agilent Technologies E8401A Manual do Utilizador Página 3

Comentários a estes Manuais

Manuais e produtos relacionados com não Agilent Technologies E8401A