7
Agilent E5813A Networked 5-
Port USB Hub
Features
• Interface a variety of GPIB, RS-
232, and USB devices to complete
your test system
• Extend USB devices beyond five
meters
• USB ports appear to be locally
attached and are locked to one
computer
Best for
• Remote access to USB ports—
devices or instruments
Connect remote USB, GPIB or
RS-232 instruments or devices via
a standard LAN
The Agilent E5813A networked 5-
port USB hub uses LAN technology
to overcome the 5-meter distance
limitation for USB cabling, so you
can place USB devices anywhere on
a LAN network. With access to
remote devices, you can collect data,
perform measurements, or monitor
the progress of your tests. Using the
included IO Libraries Suite, you can
connect an Agilent 82357B USB/GPIB
interface to one of the USB ports for
access to GPIB devices. You also can
connect an E5805A USB/4-port RS-
232 interface for access to RS-232
devices (see figure on page 8).
To prevent access conflicts, only one
computer at a time can access the
E5813A. The included software lets
you lock the E5813A to your com-
puter. Once you unlock the connec-
tion, another user can then connect
from a different computer.
For information on choosing between
E5810A and E5813A see page 8.
Utilize LAN to access the
remote USB, GPIB or RS-
232 instruments or devices
E5813A technical specifications
General requirements
Minimum system requirements Windows 2000/XP
Available USB 1.1 or 2.0 port
Software required E5813A driver (included)
Software recommended Agilent IO Libraries Suite (included);
see system requirements on page 1
Supported standards 10BASE-T/100BASE-TX networks
USB 1.1 (fully compatible with USB 2.0)
General characteristics
Power supply External switching AC adapter
Input power consumption 120/230 volts AC, 0.7amps
Power line frequency 50 to 60 Hz
Output 5 volts DC, 3 amps max
USB device power available 500 mA per device
Connectors LAN RJ-45
Standard USB A on each of 5 ports
Maximum data rates 12 Mbps from each port
Maximum instrument connections 5 USB instruments or devices
Configuration Remote LAN configuration utility
Indicators LEDs for system and device status
EMC and safety * CISPR 22 Class B
CISPR 24
IEC 60950
ITE equipment intended only for use with ISM equipment
Warranty 1 year
Network and device recommendations
IP addresses One IP address per unit
E5813A Device Sharing Locked to one computer at a time. One computer must
release the E5813A before another computer can use it.
Network utilization Maximum network utilization below 50%
Compatibility Compatible with bulk or interrupt-type USB devices;
isochronous devices are not supported.
Dimensions
Length, width, and height Device: 112 mm (L) x 182 mm (W) x 26 mm (H)
Power adapter: 110 mm (L) x 60 mm (W) x 35 mm (H)
Weight Device: 0.284 kg
Power adapter: 0.25 kg
Environmental specifications
Operating environment 0°C to 55°C
Operating Humidity Up to 90% at 40°C non-condensing
Storage environment -40°C to +70°C
Storage humidity Up to 90% at 65 °C non-condensing
* Additional detail and information in the Declaration of Conformity
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais