Agilent-technologies InfiniiVision 6000 Series Manual do Utilizador descarregar pdf (Página 20)

Performance characteristics (continued)

Scope channel triggering

Range (internal) ±6 div from center screen

Sensitivity* <10 mV/div: greater of 1 div or 5 mV; ≥10 mV/div: 0.6 div

Coupling AC (~3.5 Hz on MSO/DSO601xA, ~10 Hz on MSO/DSO603xA/605xA/610xA),

DC, noise reject, HF reject and LF reject (~50 kHz)

Logic (D15 - D0) channel triggering (MSO6000A or MSO-upgraded DSO6000A only)

Threshold range (user defined) ±8.0 V in 10 mV increments

Threshold accuracy* ±(100 mV + 3% of threshold setting)

Predefined thresholds TTL = 1.4 V, CMOS = 2.5 V, ECL = -1.3 V

External (EXT) triggering MSO/DSO6xx2A (2-/2+16-ch models) MSO/DSO6xx4A (4-/4+16-ch models)

Input impedance MSO/DSO6012A: 1 MΩ ± 3% || 11 pF or 50 Ω MSO/DSO6014A: 1.015 kΩ ±5%

MSO/DSO6032A/6052A/6102A: MSO/DSO6034A/6054A/6104A:

1 MΩ ± 3% || 14 pF or 50 Ω 2.14 kΩ ±5%

Maximum input CAT I 300 Vrms, 400 Vpk, CAT II 100 Vrms, 400 Vpk ±15 V

With 10073C 10:1 probe: CAT I 500 Vpk, CAT II 400 Vpk

5 Vrms with 50-ohm input

Range DC coupling: trigger level ±1 V and ±8 V ±5 V

Sensitivity For ±1 V range setting: DC to 100 MHz, 100 mV; MSO/DSO6014A:

MSO/DSO6032A/6052A/6102A: DC to 100 MHz: 500 mV

>100 MHz to bandwidth of oscilloscope: 200 mV MSO/DSO6034A/6054A/6104A:

For ±8 V range setting: DC to 100 MHz, 250 mV; DC to 500 MHz: 500 mV

MSO/DSO6032A/6052A/6102A:

>100 MHz to bandwidth of oscilloscope: 500 mV

Coupling AC (~3.5 Hz), DC, noise reject, HF reject and LF reject (~50 kHz)

Probe ID MSO/DSO601xA: Auto probe sense

MSO/DSO603xA/605xA/610xA: Auto probe sense and AutoProbe interface

Agilent- and Tektronix-compatible passive probe sense

Display system

Display 6.3-inch (161 mm) diagonal color TFT LCD

Throughput of scope channels Up to 100,000 waveforms/sec in real-time mode

Resolution XGA – 768 vertical by 1024 horizontal points (screen area);

640 vertical by 1000 horizontal points (waveform area)

256 levels of intensity scale

Controls Waveform intensity on front panel. Vectors on/off; infinite persistence on/off,

8 x 10 grid with intensity control

Built-in help system Key-specific help (in English) displayed by pressing and holding key or softkey of interest

Real-time clock Time and date (user adjustable)

* Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±10 °C from firmware calibration temperature.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comentários a estes Manuais

Sem comentários

Agilent-technologies InfiniiVision 6000 Series Manual do Utilizador Página 20

Comentários a estes Manuais