9
Frequency span/resolution Bandwidth (coupled):
Span Bandwidth
≤ 50 MHz 30 kHz
Audio source specifications
Frequency
Range: DC to 25 kHz.
Accuracy: 0.025% of setting.
Supplemental characteristics
Minimum resolution: 0.1 Hz.
Output level
Range: 0.1 mV to 4 V
rms
.
Maximum output current: 20 mA peak.
Output impedance: < 1 ohm.
Accuracy: ± (2% of setting + resolution).
Residual distortion (THD + noise, 0.1%, 20 Hz to 25 kHz in 80
amplitude > 200 mVrms): kHz BW.
Supplemental characteristics
Minimum resolution: Level ≤ 0.01 V: 50 µV.
Level ≤ 0.1 V: 0.5 mV.
Level ≤ 1 V: 5 mV.
Level > 1 V: 50 mV.
DC coupled offset: < 50 mV.
Audio analyzer specifications
Frequency measurement
Range: 20 Hz to 400 kHz.
Accuracy: ±(0.02% + 1 count + reference
accuracy).
External input: 20 mV
rms
to 30 V
rms
.
Supplemental characteristics
Minimum resolution: f < 10 kHz: 0.01 Hz.
f < 100 kHz: 0.1 Hz.
f ≥ 100 kHz: 1 Hz.
AC voltage measurement
Voltage range: 0 V to 30 V
rms
.
Accuracy (20 Hz to 15 kHz),
input > 1 mV
rms
: ±3% of reading.
Residual noise + THD 175 µV.
(15 kHz BW):
Supplemental characteristics
3 dB bandwidth: 2 Hz to 100 kHz.
Input impedance: 1 Mohm, 145 pF at audio in.
Minimum resolution: 4 digits for inputs ≥ 100 mV.
3 digits for inputs < 100 mV.
DC voltage measurement
Voltage range: 100 mV to 42 V.
Accuracy: ± (1.0% of reading + DC Offset).
DC offset: ± 45 mV.
Supplemental characteristics
Minimum resolution: 1.0 mV.
Distortion measurement
Fundamental frequency: 1 kHz ± 5 Hz.
Input level range: 30 mV
rms
to 30 V
rms
.
Display range: 0.1% to 100%.
Accuracy: ±1 dB (0.5 to 100% distortion).
Residual THD + noise The greater of -60 dB or
(15 kHz BW): +175 µV.
Supplemental characteristics
Minimum resolution: 0.01% distortion.
Audio filters
There are seven filters used in the 8922 test set. 50 Hz HPF,
300 Hz HPF, 300 Hz LPF, 3 kHz LPF, 15 kHz LPF, 750 µs de-emphasis,
1 kHz notch.
Comentários a estes Manuais