Agilent Technologies U1270 Series Manual do Utilizador descarregar pdf (Página 8)

General Specifications

Display • U1271A and U1272A: Liquid crystal display (LCD) (with maximum reading of

33,000counts)

• U1273A: Organic LED (OLED) display (with maximum reading of 33,000 counts)

Power consumption • U1271A/U1272A: 460 mVA maximum (with backlight enabled)

• U1273A: 180 mVA maximum (with maximum brightness)

Battery type • 4 × 1.5 V Alkaline battery (ANSI/NEDA 24A or IEC LR03), or

• 4 × 1.5 V Zinc Chloride battery (ANSI/NEDA 24D or IEC R03)

Battery life • U1271A and U1272A: 300 hours typical (based on new Alkaline batteries for DC

voltage measurement)

• U1273A: 30/45/60 hours typical (based on new Alkaline batteries for DC voltage

measurement at High/Medium/Low brightness, respectively)

• Low battery indicator will flash when the battery voltage drops below 4.4 V

(approximately)

Fuse • 10 × 35 mm 440 mA/1000 V 30 kA fast-acting fuse

• 10 × 38 mm 11 A/1000 V 30 kA fast-acting fuse

Operating environment • Operating temperature from –20 to 55 °C, 0 to 80% RH

• Full accuracy up to 80% RH for temperatures up to 30 °C, decreasing linearly to

50% RH at 55 °C

• Altitude up to 2000 meters

• Pollution degree II

Storage compliance –40 to 70 °C, 0 to 80% RH

Safety compliance • CAN/CSA-C22.2 No. 61010-1-04

• EN/IEC 61010-1:2001

• ANSI/UL 61010-1:2004

Measurement category CAT III 1000 V/CAT IV 600 V

Electromagnetic compatibility (EMC) Commercial limits compliance with EN61326-1

Ingress protection rating IP-54

Temperature coefficient 0.05 × (specified accuracy) / °C (from –20 to 18 °C, or 28 to 55 °C)

Common Mode Rejection Ratio (CMRR) > 120 dB at DC, 50/60 Hz ± 0.1% (1 kΩ unbalanced)

Normal Mode Rejection Ration (NMRR) > 60 dB at 50/60 Hz ± 0.1%

Dimensions (W x H x D) 92 × 207 × 59 mm

Weight • U1271A: 518 grams (with batteries)

• U1272A: 520 grams (with batteries)

• U1273A: 500 grams (with batteries)

Warranty • Three years for product

• Three months for product’s accessories

Calibration cycle One year

Specification Assumptions

• Accuracy is given as ±(% of reading + counts of least significant digit) at 23 °C ± 5 °C, with relative humidity less than

80% RH.

• AC V and AC μA/mA/A specifications are AC coupled, true RMS and are valid from 5% of range to 100% of range.

• The crest factor may be up to 3.0 at full scale except for the 1000 V range where it is 1.5 at full scale.

• For non-sinusoidal waveforms, add (2% reading + 2% full scale) typical, for crest factors up to 3.

• After Z

LOW

voltage measurements, wait at least 20 minutes for thermal impact to cool before proceeding with any other

measurement.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 25 26

Comentários a estes Manuais

Sem comentários

Agilent Technologies U1270 Series Manual do Utilizador Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Multímetros Agilent Technologies U1270 Series