Agilent Technologies N9320A Manual do Utilizador descarregar pdf (Página 8)

Input attenuation switching uncertainty at 50 MHz

Absolute amplitude accuracy

Reference level

Reference level accuracy

Level measurement uncertainty

Spurious response

Sweep time

Attenuator setting: 0 to 70 dB in 1 dB steps

0 to 60 dB attenuation: ±(0.3 dB + 0.01 x attenuator setting) Reference 10 dB

Preamp off: Bd01noitaunettatupni;mBd01–levelecnerefeRBd3.0±

Preamp on: Bd01noitaunettatupni;mBd03–levelecnerefeRBd4.0±

Setting range: –60 dBm to +30 dBm, in steps of Preamp off

1 dB, 2 dB, 5 dB or 10 dB

–100 dBm to –10 dBm, in steps of Preamp on

1 dB, 2 dB, 5 dB or 10 dB

Setting resolution: elacsgoLBd1.0

1 % of reference leve

Linear scale

Same as attenuation accuracy

+30 to –10 dBm

± 0.3 dB

–10 to –30 dBm

± 0.5 dB

–30 to –60 dBm

± 0.7 dB

–60 to –80 dBm

± 0.9 dB

–80 to –90 dBm

10 MHz to 3 GHz: ;C°03ot02;levelecnedifnoc%59Bd2±

reference level 0 to –50 dBm; input attenuation 10 dB;

RBW 1 kHz; VBW 1 kHz; amplitude scale log;

log range 0 to –50 dB from reference level;

sweep time coupled; signal input 0 to –50 dBm;

after calibration; preamplifier off.

Second harmonic distortion:

fzHM01

mBd53+

c 500 MHz

zHM005

mBd34+)tpecretnicinomrahdnoces(

c 3 GHz

Preamplifier off ;

input level -20 dBm; input attenuation 10 dB

Third-order intermodulation:

zHG3otzHM001;lanimonmBd31+

mBd01+

(third order intercept)

Preamplifier off; two -20 dBm tones,

10 dB input attenuation with separation > 200 kHz

Input related spurious: reximtupnitalangismBd03–cBd06–<

Residual response: ,noitaunettaFRBd0dnadetanimrettupnImBd38–<

fforeifilpmaerp)tnerehni(

Range: 10 ms to 1000 s Span > 0 Hz

20 )napsorez(zH0=napSs002ots

Sweep mode: Continuous; single

Trigger source: Free run; video; external

Trigger slope: Positive or negative edge; selectable

sample detector, signal at reference level.

enter frequency 50 MHz; RBW1 kHz; VBW 1 kHz; amplitude scale log; span 100 kHz; sweep time coupled,

Center frequency 50 MHz; all auto, and referenced to –10 dBm ( –30 dBm, p reamp on).

When reference level > -80 dBm, RBW = 1 kHz, otherwise RBW = 10 Hz.

Sweep

1 2 3 4 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários

Agilent Technologies N9320A Manual do Utilizador Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Multímetros Agilent Technologies N9320A