Agilent Technologies 1000A Manual do Utilizador Página 10

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 14
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 9
Performance characteristics
10
Bandwidth (-3dB)
1, 2
DSO1052B: DC to 50 MHz
DSO1002A, DSO1004A: DC to 60 MHz
DSO1072B: DC to 70 MHz
DSO1102B, DSO1012A, DSO1014A: DC to 100 MHz
DSO1152B: DC to 150 MHz
DSO1022A, DSO1024A: DC to 200 MHz
Real-time sample rate 2 GSa/sec half channel interleaved, 1 GSa/sec all channels (A models)
1 GSa/sec half channel interleaved, 500 MSa/sec all channela (B models)
Memory depth 20 kpts half channel interleaved, 10 kpts all channels (A models)
16 kpts half channel interleaved, 8 kpts all channels (B models)
Channels DSO1052B, DSO1002A, DSO1072B, DSO1102B, DSO1012A, DSO1152B, DSO1022A : 2 channels
DSO1004A, DSO1014A, DSO1024A : 4 channels
Vertical resolution 8 bits
Vertical sensitivity (range) 2 mV/div to 10 V/div
DC gain accuracy
1
2 mV/div to 5 mV/div: ± 4.0% full scale (A and B models)
10 mV/div to 5 V/div: ± 3.0% full scale (A models only)
10 mV/div to 10 V/div: ± 3.0% full scale (B models only)
Vertical zoom Vertical expand
Maximum input voltage CAT I 300 Vrms, 400 Vpk; transient overvoltage 1.6kVpk
Dynamic range +6 divisions from center screen
Time-base range DSO1022A, DSO1024A: 1 nsec/div to 50 sec/div
DSO1012A, DSO1014A, DSO1102B: 2 nsec/div to 50 sec/div
DSO1002A, DSO1004A, DSO1052B, DSO1072B: 5 nsec/div to 50 sec/div
Selectable BW limit 20 MHz
Horizontal modes Main (Y-T), XY, delayed zoom and roll
Input coupling DC, AC and ground
Input impedance 1 MΩ ±1% in parallel with 18 pF ± 3 pF (A models)
1 MΩ ±2% in parallel with 15 pF ± 3 pF (B models)
Time scale accuracy
1
± 50 ppm from 0 °C to 30 °C, (A models)
± 50 ppm + 2 ppm per °C from 30 °C to 45 °C + 5 ppm × (years since manufacture) (A models)
± 50 ppm over 1 ms (B models only)
1.
Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±10°C from firmware calibration temperature.
2.
20 MHz (when vertical scale is set to < 5 mV)
Vista de página 9
1 2 ... 5 6 7 8 9 10 11 12 13 14

Comentários a estes Manuais

Sem comentários